Learn how EEEngineering uses ETAP to transform power studies into engaging, interactive presentations

In most cases, SCCAF (Short Circuit Coordination Arc Flash) studies are done by engineering firms, which then submit reports to facility owners. The challenge is that those reports tend to be lengthy (up to 5,000 pages), not engaging, and hard to grasp for facility personnel. ETAP's powerful graphical and presentation tools can help make those reports livelier, informative, and more engaging. This case study will discuss how you can summarize lengthy power studies reports within just a 30-minute interactive meeting, and highlight how the final ETAP model can be used, with its powerful graphical interface and presentation tools, including Data Blocks, Multiple Presentation layers, Sequence of Operations, and Arc flash calculator.

How Nexamp Energy uses ETAP for higher quality and accuracy in BESS DC arc flash analysis

Engineers face unique challenges when calculating DC Arc Flash (DCAF) incident energy for Battery Energy Storage Systems (BESS). Battery short circuit current is highly variant, and factors such as battery chemistry and the installation arrangement of BESS contribute to significant differences in short circuit behavior. As well, traditional methods of calculating DCAF may not be sufficient when it comes to BESS. Nexamp Energy studied these variations, including considerations for personal protection equipment (PPE). The Transient DC Arc Flash solution provided by ETAP was also examined to highlight the usefulness of model validation and the importance of high quality analysis methods for providing better accuracy in DCAF analysis for BESS.

Create fully customizable Arc Flash Hazard Labels in any language for any standard with ETAP eLabelMaker™

ETAP Arc Flash Analysis software includes a variety of arc flash hazard safety labels in multiple languages. This webinar will demonstrate the new eLabelMaker™ features, such as two-incident energy result labels, QR codes, and fully customizable label. Create arc flash labels in any language even without having access to specific ETAP Language Editions. Existing arc flash labels are still available with every release, but in addition, the eLabelMaker™ allows the user to create any type of label, depending on the specific needs or regional standard requirements.

Generator Brush Collector Ring’s Arc Flash Hazard, A Safety Concern!

AC and DC Arc Flash Methods for Renewable Energy Systems

This presentation will address the difficulties and lessons learnt on performing arc flash analysis using available methods (outside the voltage limits of IEEE 1584-2018 standard) on a 2.3 MW PV generation facility. The analysis includes system modeling, short-circuit, arc flash (both AC and DC) using various applicable calculation methods that best fit this application along with available tools in ETAP and generating worst-case arc flash deliverables.

Industrial Plant Electrical Risk Management Program

The Electrical Risk Management (ERM) group at FTI uses ETAP to provide short circuit, coordination, and arc flash studies as a part of building a safety program for industrial facilities around the US and Canada. This presentation will describe our approach to an overall safety program and the ways that a safety program encompasses more that just an engineering study. Some topics to be discussed are the need for maintenance personnel to understand the labeling, assessing the risk vs. just looking at the label, the choice between full coordination and arc flash hazard, field verification, and bolted fault current vs arcing fault current as it relates to equipment evaluation. We will look at the ETAP model of one of our industrial customers and discuss the benefits of using ETAP for our studies – reliability, adaptability to many systems by using configurations and scenarios, wizards, availability of DC and MV calculations, Star TCCs, ease of exporting reports to Excel, and solar and wind sources capability.

ETAP ArcSafety Solution Overview - A comprehensive suite of Arc Flash software analysis tools

Learn about ETAP ArcSafety, an all-in-one AC & DC arc flash solution for LV, MV & HV systems that improves safety, reduces risk, minimizes equipment damage, and validates mitigation techniques.

HV Arc Flash Studies for one of the Largest Utilities in South America

This presentation focuses on HV arc flash hazard analysis, as part of a multi-voltage AF study (115, 34.5, 13.8, and 0.22 kV) for one of the three largest utilities in South America with hydro and renewables generation and T&D. It demonstrates the versatility of the ETAP ArcFault™ to assist in the calculations and estimates of electric arc currents and incident energy level for HV substation equipment. The presentation discusses how ArcFault study results were used to select engineering and administrative control strategies, personal protective equipment (PPE), changes in protection schemes and adjustments to reduce electrical risks in operation & maintenance of electrical T&D systems.

AC Arc Flash using IEEE 1584 - University Campus Case Study

Since the release of IEEE 1584-2018, the industry has been challenged to reach a consensus on applying the new standard. The most significant application “pain” so far has been identifying actual equipment data for input to the study, including bus gap and electrode configurations in the equipment. A case study of an arc flash analysis for a large university campus with MV and LV power distribution equipment of different types, vintages, and manufacturers is presented. The presentation highlights selection of electrode configuration(s) for various equipment types and voltage levels and correct application of arc current and enclosure size correction factors to significantly reduce the data entry time and effort. The presentation will cover upcoming IEEE P1584.1 revisions to apply IEEE 1584 for arc-flash hazard calculations directly from the revision subgroup chair.

Data Center Power System Expansion: DC Arc Flash Case Study

Case study of a a power system study, which involved the replacement of an extensive UPS system at a data center. The studies included short-circuit, protective device coordination, and arc-flash hazard analysis for both the AC and DC systems consistent with the NFPA 70E 2027 and IEEE 1584 2018 Standards. The DC equipment as installed required mitigation efforts due to high incident energies. This presentation details the analysis, findings, and recommended mitigation for anyone embarking on similar retrofit or expansion studies.

ETAP DC Arc Flash Analysis - Part 1-3

The topics discussed in this video are the characteristics of an Arc, DC Short Circuit calculations, the Maximum Power Method, the Stokes and Oppenlander Method, Paukert Method, how these methods are utilized in ETAP, the calculation of incident energy, how to configure ETAP 11.1 to determine whether or not you are dealing with an open or closed air equipment, and the result analyzer.

Arc Flash

Introduction to ETAP Arc Flash, analysis module. Learn how to get started with Arc Flash.

Star™ Auto-Evaluation: Automated Protection & Coordination Design

This presentation will highlight how Star Auto-Evaluation software can improve your system design, safety, reliability and operation. Validate protective device settings for equipment protection, identify mis-coordination and fix zone selectivity issues, apply industry rules for system protection & coordination and significantly increase efficiency, accuracy, and design consistency.

Low Voltage Cable Capacity, Sizing & Protection against Electric Shock

ETAP provides a comprehensive, integrated design and analysis solution for electric power systems. This webinar will highlight several study cases to demonstrate the software’s capabilities in LV system modeling for cable capacity, sizing and protection against electric shock, as well as reporting and project deliverables.